Refrigeration Package Systems

MAXIBOREAL
The MAXIBOREAL split system line covers the 5 most common commercial refrigeration applications from cutting and preparation halls to positive and negative cooling rooms up to 400 m3.

MAXIBOREAL is a split system specifically designed to offer you maximum comfort: accessibility to components, low noise option, oversized condenser block for hot countries… Total control of production and numerous factory inspections ensure optimum operating reliability. The 5 pre-selected applications are as follows:

- Double-flow unit cooler: rooms at +8 °C / DT 10K.
- Cubic unit cooler: rooms at +6 °C / DT 6K, +2 °C / DT 8K, 0 °C / DT 8K and -20 °C / DT 7K,
The fin spacing and defrost methods are different for each application.

CONDENSING UNIT
• The condensing unit is housed for outdoor installation. Three compressor technologies are available: hermetic pistons, semihermetic pistons and Scroll. Each compressor is equipped with an oil sight glass, case heating element, suction and delivery valves.
• LP regulation and HP safety are provided by factory-set pressure switches.
• The vertical condenser is equipped with 1 to 4 fans depending on the model with different rotation speeds to suit various environmental conditions.
• As standard, condensing pressure regulation is provided with variation of the fan speed or with the pressure switches depending on the model.
• The liquid receiver is equipped with an outlet valve to isolate the liquid line composed of a filter drier cartridge, a sight glass and a manual shut-off valve.
• The electrical enclosure is incorporated into the casing and the main circuit-breaker is protected in a case to avoid any damage during transport.
• The unit is pre-charged with R404A refrigerant.

UNIT COOLERS
• Dual discharge evaporator, low noise level or cubic depending on the applications,with factory-fitted expansion device and solenoid valve. For further details, consult our commercial evaporators brochure.

CONTROL
• Electronic regulation.
• Defrost control (air or electric).
• Lighting control.
• Display and transfer of alarms.
• An additional programmable contact (door open, person inside enclosure safety switch...).
• Built-in forced operation for fast cooling or freezing.

Download the Maxiboreal technical specification (pdf)

MONOHAVANE

Designed to meet the needs of a wide range of commercial industrial cooling applications, the MONOHAVANE condensing unit line comprises capacities from 5 to 75 kW.

These totally enclosed units are installed outdoors either on the ground or on the roof.

The MONOHAVANE line offers a solution to noise problems (down to 39 dBA at 10 m with the low noise level option), and may be used under extreme outdoor temperature conditions.

Download the Monohavane technical specification (pdf)